Ping Failed-Configure ADDS Between Two Subnets

I’m on Mod-2, Lab: Configure ADDS Between Two Subnets. I am not able to ping, and not sure if the NAT was not setup correctly. If so, I’m not sure how to do that or locate it. Help!!!

Here’s the setup:
SROUE01PC:
Ethernet1:
192.168.0.20
255.255.255.0
Ethernet2:
192.168.2.20
255.255.255.0

SADC01:
192.168.0.10
255.255.255.0
192.168.0.20 -GW
DNS:
192.168.0.10
192.168.2.11

SADC02:
IP 192.168.2.11
255.255.255.0
192.168.2.20 -GW
DNS:
192.168.0.10
192.168.2.11

Here the image:

2 Likes

WOW! I just realized I missed this completely. Did you ever get this working? So sorry about that!

Your networking looks to be spot on as far as your IP configuration. What is the default gateway of your route server? The Route server should have a default gateway that will connect it to the internet (this would explain the broken connection icon in the bottom right).

As far as the failed pings go - you may need to open ICMP ping request in your Windows Firewall or turn it off for testing purposes.

Overall I think you were very close!